How Do You Use an Underwater Camera For Ice Fishing?

We use affiliate links in this article. And, as an Amazon Associate, I earn from qualifying purchases. Thanks for your support.

Underwater cameras are very useful to capture what’s happening underwater. But are you confused about how to use your underwater camera for ice fishing?

It can look difficult at first but you will get the hang of it soon. Just read to find out how to use an underwater camera for ice fishing! 

How to Use an Underwater Camera For Ice Fishing?

Underwater Camera For Ice Fishing

The first thing you should do is drill a hole that is big enough for the camera to get underwater. 

Before you put in your camera underwaters, look for a good spot and find out what’s happening in that region regarding the fish activity. It’s recommended to keep your monitor inside an ice fishing tent so that the view is not disturbed by bright sunlight.

Locate a place that is not overcrowded with fish underneath. Next send down the camera into the hole using the cable and plunge it into the water to the desired depth. 

Make sure to place the monitor in a chair on the ground. 

Drop down your bait and try to find it on the camera. Look through the monitor and set the camera at an angle that gives you a good view of the bait and the surroundings. Twist or move the cable to get the bait on the center of the camera.

Now your camera is all set to film everything underwater. Underwater cameras not only give a view of the location of the fish or how deep it is present, but you can also take a look at what species of fish are approaching your bait.

Gone are the days when you have to keep waiting for hours and hours till a fish grabbed your bait. Now you can precisely look at what’s going on underwaters and grab your catch easily. 

Some Tips to Use The Underwater Camera For Ice Fishing

  • Be gentle while lowering your camera. Doing it hastily and with force can scare the fish and you might repel them away from the bait.
  • If you want to avoid your camera from spinning midwaters, then you should consider placing it in a pile of mud or rock underwater. You can also go for a motorized tripod or even consider tying a weight below the camera.
  • Lighting is the key to good footage, especially in the case of murky waters. In that case, you can go for the infrared mode to get a clearer picture.

Final Words

So this is how you use an underwater camera for ice fishing. Go on and see how it works for you!